Faston 6.3x0.8mm battery terminal cover set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of covers for small lead-acid battery terminals
- Ocena
- 4,5 / 5
- Polubienia
- 5
- Pobrania
- 74
- Wydruki
- 3
- Wyświetlenia
- 392
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Lead acid batteries come with a useful protector plastic cover for their terminals. These tiny parts can be lost very easily.
I made a replica for them.
The slit is 6.5*0.8mm, quite tight fit, won't fall of easily. 3D printers are not too accurate in such small dimensions, on your printer it might require some adjusting with a pliers on the terminal to fit more smoothly, or a few percent upscaling.
The single pole variant needs only 8 minutes to print.
I made a variant for both poles connected with a string. This fits lead-acid batteries up to 12V 12Ah.
Fusion360 project included as well.