Nikon 14-24 mm f2.8 locking lens cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement lens cap for the Nikon 14-24 mm f2.8 wide angle lens that locks with a 90° twist.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 578
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
I lost the lens cap for my Nikon 14-24 mm wide angle lens in strong wind, so I figured rather than spending a fortune on a piece of plastic, I'd just print one and found a model on thingiverse. It works great and I really like the locking mechanism. Based on the comments, it apparently wears out though, so I tried making the model a bit more durable and pretty.
You just slide it onto the lens, twist 90° and the grooves on the inside interlock to prevent the cap from falling off the lens. It fit perfectly printed in PET-G with a 0.6 mm nozzle. But you can tune the dimensions using the parameters in the f3d file if needed (or if you don't have Fusion, send me message and I can supply a STL with modified dimensions).