Sotabeams Carbon 6 lightweight guying set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple set for portable antenna setup
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 516
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Lightweight set for portable antenna setup only 22gr for all elements in TPU
Set was designed to be as light as possible, with decent ammount of strenght, and for minimum ammount of guying rope to be used.
Designe is intended and printed with TPU, so the sizes are very tight, if you want to print it in regular materials as PETG or PLA do use XY Size compensation function while slicing
Base for bottom of the pole
Middle support around 1.8m from the ground (5th section)
Top (wire support) 3rd section from top
Its designed for Sotabeams Carbon 6 mast, but it will fit other that are within dimension range, elements data are Base 30.6mm Middle section 20mm Top (wire loop) 4mm