minilathe tailstock lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A super simple tailstock "camlock" for my Sieg C2 (and probably others) minilathe
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I have a cheap minilathe with the usual problem of having to break out a 17mm wrench to tighten and loosen a bolt to lock the tailstock.
Rather than going through all the trouble to machine the usual style of camlock, I decided to go super simple and just make a tiny lever to slip over and tighten the bolt.
It works well and can lock things tight with just a quarter turn as long as your bed is a consistent thickness over the working range of the tailstock. It's probably supposed to be 10mm, but good luck finding that consistency out of the box. In my case I had to file about 0.5mm of paint and cast iron from the bottom in the area of the tailstock end.