Vented Pendant Lamp Shade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pendant light shade for use with E26 LED bulbs and commodity hanging pendant light sockets. Vented for LED longevity.
- Ocena
- 4 / 5
- Polubienia
- 57
- Pobrania
- 193
- Wydruki
- 1
- Wyświetlenia
- 1462
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
WARNING: Not for use with non-LED bulbs (unless you print this in an exotic super high temp material)
Needed some workspace lighting for my workbenches around the office and pendant lights seemed like an easy way to go. I was shocked at the lack of options and high prices online, so put this together in FreeCAD and printed a bunch out.
Tension fits/screws onto ~80mm threaded pendant sockets but also has enough top weight/support to sandwich with bolts.
My BOM:
| 1 | generic pendant E26 sockets like | https://amzn.com/B08NWVGRMW |
| 1 | light cord of some length | https://amzn.com/B07VR3YKMY |
| 1 | 120/240v plug for your location | https://amzn.com/B0013BAS20 |
| 2 | Printed Ceiling Cable Hooks | https://www.printables.com/model/215262-ceiling-cable-hook |
Print Suggestions:
- 10% infill works fine.
- Any stable filament will do
- Some filaments will glow depending on transparency. If you don't want this, matte filaments tend to block most/all light from getting through the material.
- You may want to paint a seam in your slicer so that it is uniform on one side