Toyota ATF filler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder for a hose used when filling the transmission of most modern Toyota vehicles
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This is a holder for a hose used when filling the transmission of most modern Toyota vehicles. It is a M18-.5 thread with a 24mm socket size (like the stopper plug you have to remove). The part can be used to secure a hose into the filler hole so that you don't risk covering your floor in ATF. The notch is a breather to allow displaced air to flow out. Orient it to the top of the hole. You can optionally use an O ring to prevent drips. Push the hose through this part so it is proud of the inside of the print to avoid drips.
Included are versions for 6mm and 3/8ths inch OD hoses.