Toyota ATF filler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a holder for a hose used when filling the transmission of most modern Toyota vehicles
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 53
- Makes
- 0
- Views
- 335
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
This is a holder for a hose used when filling the transmission of most modern Toyota vehicles. It is a M18-.5 thread with a 24mm socket size (like the stopper plug you have to remove). The part can be used to secure a hose into the filler hole so that you don't risk covering your floor in ATF. The notch is a breather to allow displaced air to flow out. Orient it to the top of the hole. You can optionally use an O ring to prevent drips. Push the hose through this part so it is proud of the inside of the print to avoid drips.
Included are versions for 6mm and 3/8ths inch OD hoses.