Abstract Trophy

I made this trophy as a prize for a GeoGuesser tournament at my student association. You may be able to spot something that resembles a pinpoint marker in negative space. 

However since the design is fairly abstract it should work as a general trophy just as well.

The prints require a couple filament swaps mid print, one for the base connecting to the red middle section and one for the name plate. This is all very easy to do in PrusaSlicer. 

I used a 0.4mm nozzle on my MK3S+ at 0.2mm layer height and 15% infill though rougher settings should have minimal impact on the quality of the model. You won't need support material for any of the parts.

For the full assembly you'll need a bit of glue and small 1mm wide circular hook, see the pictures. I dropped the hook in place during printing using the pause on layer feature in PS. This is just what I had on hand but different connections should be possible. I challenge you to come up with your own solution (The circle is 45 mm in diameter and 4 mm's thick) or send me a message with a request ;). 

The middle section offers a lot of space to personalize your trophy to your needs. I printed the logo and branding of my association as you can see in the pictures. However, I left these out so the canvas is yours to play with. 

Happy printing :)