Abstract Trophy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An abstract trophy originally meant for a Geoguesser tournament. No branding on stls.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 57
- Makes
- 0
- Views
- 443
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
I made this trophy as a prize for a GeoGuesser tournament at my student association. You may be able to spot something that resembles a pinpoint marker in negative space.
However since the design is fairly abstract it should work as a general trophy just as well.
The prints require a couple filament swaps mid print, one for the base connecting to the red middle section and one for the name plate. This is all very easy to do in PrusaSlicer.
I used a 0.4mm nozzle on my MK3S+ at 0.2mm layer height and 15% infill though rougher settings should have minimal impact on the quality of the model. You won't need support material for any of the parts.
For the full assembly you'll need a bit of glue and small 1mm wide circular hook, see the pictures. I dropped the hook in place during printing using the pause on layer feature in PS. This is just what I had on hand but different connections should be possible. I challenge you to come up with your own solution (The circle is 45 mm in diameter and 4 mm's thick) or send me a message with a request ;).
The middle section offers a lot of space to personalize your trophy to your needs. I printed the logo and branding of my association as you can see in the pictures. However, I left these out so the canvas is yours to play with.
Happy printing :)