Maple sap spout for minimal tree damage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Maple sap spout that only needs a 3/16'' or 7/32'' (5.5 mm) hole in the maple tree for minimal damage
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 408
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It is now proven that the smaller the hole, the less the maple tree suffer from it. To do a traditional maple sap harvest by using a bucket, the smallest spout I could find on the market requires a 5/16'' (7.9 mm) hole. This new spout only requires a 3/16'' or 7/32'' (5.5 mm) hole in the tree (1.75'' or 45 mm deep max).
A special hole is provided to hold a standard lid and you must insert a small piece of 1/4 PEX pipe to bring the sap to the bucket. Finally, you must also create a hook with wire to hold the bucket. The pictures will help you set this up.
Finally, I recommend using PETG and not using the spout more than one season because it will be difficult to clean.
Have a good harvesting!