Maple sap spout for minimal tree damage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Maple sap spout that only needs a 3/16'' or 7/32'' (5.5 mm) hole in the maple tree for minimal damage
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 42
- Makes
- 0
- Views
- 408
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It is now proven that the smaller the hole, the less the maple tree suffer from it. To do a traditional maple sap harvest by using a bucket, the smallest spout I could find on the market requires a 5/16'' (7.9 mm) hole. This new spout only requires a 3/16'' or 7/32'' (5.5 mm) hole in the tree (1.75'' or 45 mm deep max).
A special hole is provided to hold a standard lid and you must insert a small piece of 1/4 PEX pipe to bring the sap to the bucket. Finally, you must also create a hook with wire to hold the bucket. The pictures will help you set this up.
Finally, I recommend using PETG and not using the spout more than one season because it will be difficult to clean.
Have a good harvesting!