1 / 3
Voron 2.4 Purge Bucket - for right extrusion, and shortened — zdjęcie 1
1 / 3

Voron 2.4 Purge Bucket - for right extrusion, and shortened

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed to mount on right bed extrusion, and protrude less under the bed. Use the brush holder from the original mod.

Ocena
5 / 5
Polubienia
39
Pobrania
203
Wydruki
3
Wyświetlenia
2446
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Note: original mod is https://github.com/VoronDesign/VoronUsers/tree/master/orphaned_mods/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber

also found on Printables at https://www.printables.com/model/97976-voron-nozzle-cleaner-purge-bucket

This is a remix only of the bucket. Grab the other parts from the original page. 

Why? Because I have a Klicky dock on the left, I moved my Z endstop to the left side, and wanted to mount the bucket on the right-side extrusion (to avoid interference). I also have a wago mount under the bed, and so I shortened one side of the bucket so that it is a bit shorter than the original. 
 

I couldn't find an original CAD so I hacked away at this in Fusion 360 with some mesh editing of the original STL. 

Tagi