Rapberry Pi 3 Sting Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This enclosure is for a Raspberry Pi 3 or any Model B.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v2.0
This enclosure is for a Raspberry Pi 3 or any Model B.
The enclosure is well-crafted with a tight fit, such that the Raspberry Pi fits snugly inside it. Although it can be fastened with four self-tapping screws, this may not be necessary as the tight fit alone is sufficient to keep everything in place.
I used the following printer settings are:
Material: PLA
Layer Height: 0.28
Infill Density: 25%
Support: None
The enclosure has been designed to require no support material during the 3D printing process, making it an easy and straightforward project to print.