1 / 2
Rapberry Pi 3 Sting Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This enclosure is for a Raspberry Pi 3 or any Model B.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 19
- Makes
- 0
- Views
- 114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v2.0
This enclosure is for a Raspberry Pi 3 or any Model B.
The enclosure is well-crafted with a tight fit, such that the Raspberry Pi fits snugly inside it. Although it can be fastened with four self-tapping screws, this may not be necessary as the tight fit alone is sufficient to keep everything in place.
I used the following printer settings are:
Material: PLA
Layer Height: 0.28
Infill Density: 25%
Support: None
The enclosure has been designed to require no support material during the 3D printing process, making it an easy and straightforward project to print.