1 / 1
Gridfinity Wire Spool Holder for NTE/MicroCenter branded wire spools
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very niche part, but these spools are common enough that I figured maybe others would want it.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 2
- Wyświetlenia
- 215
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I have a bunch of these NTE 24 AWG wire spools and thought I'd make a Gridfinity holder for them. I chose to do single spools because sometimes I only need one or two at a time for a project.
This is a single part and you just need to snap the spool in to place with a very light amount of force. They come out just as easily, and spin quite freely. THere's a hole on the front to pull the wire through so you can just pull it.
I recommend pairing this with a 2x2 weighted baseplate.