1 / 1
Gridfinity Wire Spool Holder for NTE/MicroCenter branded wire spools
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a very niche part, but these spools are common enough that I figured maybe others would want it.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 2
- Views
- 215
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I have a bunch of these NTE 24 AWG wire spools and thought I'd make a Gridfinity holder for them. I chose to do single spools because sometimes I only need one or two at a time for a project.
This is a single part and you just need to snap the spool in to place with a very light amount of force. They come out just as easily, and spin quite freely. THere's a hole on the front to pull the wire through so you can just pull it.
I recommend pairing this with a 2x2 weighted baseplate.