DeWalt Battery Holder x2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall / Undermount holder for 2x DeWalt Power Tool Batteries
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 196
- Wydruki
- 1
- Wyświetlenia
- 990
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Remix of IR Blinx' "Bestfit" STL for 3x batteries, but resized for 2x batteries. This is the scaled 105% version Prints vertically, no supports.
Fits DeWalt 18v & 20v batteries. May fit 10.8v, 14v, 24v, 36v, 40v, 54v & 60v batteries as I believe they have similar slide-in track tool interface systems; However I don't have those batteries on hand to test, so YMMV. Let me know which ones work or do not work for those battery voltages and I'll adjust this description as needed.
Important Note on Scaling
As IR Blinx Pointed out, you may need to scale this to ensure the correct fit. Also a de-burr of edges is important.
Make in photo is Prusament PLA.