Water Experiment Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Water Experiment Remix (Sources cited)
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 765
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Share Alike
It's really a combo of two models, with some remixing and scaling.
Expect sanding for fine tuning.
I used CA glue for the connection between the base and the bottoms of the frame rails, but most connecting are friction fit. Enjoy!
In the .stl file for the cams:
Top row: 2, 3, 4, 5
Mid row: 6, 7, 8, 9
Bottom row: 10, 11, Center
Cam Assembly Order from left to right:
2 3 4 5 6 7 8 9 10 11 Center 11 10 9 8 7 6 5 4 3 2
I also sourced parts from Printer_of_3D's Water Experiment Automata, which can be found here →https://www.thingiverse.com/thing:4880414
Parts sourced from dav88:
Cams 2-11 and Center (Scaled)
Center shaft (Scaled and remixed)
Parts sourced from Printer_of_3D:
Rings (Scaled)
Ball (Scaled)
Ring Lifters (Scaled and remixed)
Top and Middle Guide Rails (Scaled and remixed)
Left and Right Frame Rails (Scaled and remixed)
Base (Scaled)
Crank Handle (Scaled and remixed)