1 / 11
CR-6se Sunlu Filament Dryer Top Rail Mount — zdjęcie 1
1 / 11

CR-6se Sunlu Filament Dryer Top Rail Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a top rail mounted tray to hold the Sunlu FilaDryer S1.

Ocena
0 / 5
Polubienia
2
Pobrania
20
Wydruki
0
Wyświetlenia
225
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

This is a top rail mounted tray to hold the Sunlu FilaDryer S1. It's a two piece design for strength.

The rail part is slid into the tray from the top and secured with the M3x12 screws & nuts. I used Button head screws for the low profile.

Then the assembly slides over the top rail of the printer. It's designed to sit on top of the left z-axis bearing block to help with stability and is attached with 4 M3 screws and t-nuts.

I'm using Buszmen61's Hygrometer holder (https://www.thingiverse.com/thing:4650052) and

MB_AUZ's remixed Top Mounted Filament Guide (https://www.thingiverse.com/thing:4697116) to hold the bowden tube in place.

EDIT 02-05-2021: A user pointed out to me that the rail didn't have the holes in it to mount to the extrusion. I have uploaded a new file "Sunlu Holder_rail_with_holes" to correct that oversight.

Print Settings

Printer Brand:

Creality

Printer:

CR10S PRO

Rafts:

No

Supports:

No

Resolution:

0.28

Infill:

15%

Filament: Overture PLA Matte Black


Notes:

I printed this on my CR-10S Pro so I could print without supports. I believe it will print on the CR-6 but you'll have to stand it on end which will of course need supporting.

How I Designed This ===================

I used Tinkercad, the design is here: https://www.tinkercad.com/things/bgkuPsADCwc-sunlu-holder

It's made for the 2020 top rail on the CR-6 SE, but shouldn't be too hard to adapt to other aluminum extrusion sizes if you want.

Category: 3D Printer Accessories

Tagi