CR-6se Sunlu Filament Dryer Top Rail Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a top rail mounted tray to hold the Sunlu FilaDryer S1.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a top rail mounted tray to hold the Sunlu FilaDryer S1. It's a two piece design for strength.
The rail part is slid into the tray from the top and secured with the M3x12 screws & nuts. I used Button head screws for the low profile.
Then the assembly slides over the top rail of the printer. It's designed to sit on top of the left z-axis bearing block to help with stability and is attached with 4 M3 screws and t-nuts.
I'm using Buszmen61's Hygrometer holder (https://www.thingiverse.com/thing:4650052) and
MB_AUZ's remixed Top Mounted Filament Guide (https://www.thingiverse.com/thing:4697116) to hold the bowden tube in place.
EDIT 02-05-2021: A user pointed out to me that the rail didn't have the holes in it to mount to the extrusion. I have uploaded a new file "Sunlu Holder_rail_with_holes" to correct that oversight.
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
No
Resolution:
0.28
Infill:
15%
Filament: Overture PLA Matte Black
Notes:
I printed this on my CR-10S Pro so I could print without supports. I believe it will print on the CR-6 but you'll have to stand it on end which will of course need supporting.
I used Tinkercad, the design is here: https://www.tinkercad.com/things/bgkuPsADCwc-sunlu-holder
It's made for the 2020 top rail on the CR-6 SE, but shouldn't be too hard to adapt to other aluminum extrusion sizes if you want.
Category: 3D Printer Accessories
