1 / 9
Squash ball feet Prusa Mk2.5s Low profile
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low profile squash ball mod for Prusa mk2... Should work on all mk2 Profiles
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I found that there is no low profile mod to use squash balls for the Prusa mk2 series with the threaded rods.
So I made this model for my Prusa mk2.5s in a 45° and 90° variant and a 45° variant for the PSU corner. The 90° variant works for both sides, the 45° variant needs to be mirrored once.
The feet clip in place, but you will have to press and wiggle it to the right spot.
Printed with 3 perimeters and 20% infill, no supports.