1 / 9
Squash ball feet Prusa Mk2.5s Low profile
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Low profile squash ball mod for Prusa mk2... Should work on all mk2 Profiles
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 29
- Makes
- 0
- Views
- 222
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
I found that there is no low profile mod to use squash balls for the Prusa mk2 series with the threaded rods.
So I made this model for my Prusa mk2.5s in a 45° and 90° variant and a 45° variant for the PSU corner. The 90° variant works for both sides, the 45° variant needs to be mirrored once.
The feet clip in place, but you will have to press and wiggle it to the right spot.
Printed with 3 perimeters and 20% infill, no supports.