Wall Mount J1772 Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this wall-mounted J1772 connector holder with a built-in cable hanger that can be printed without supports.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 232
- Wydruki
- 2
- Wyświetlenia
- 1132
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Just got an EV after my old car finally had enough. I designed this wall-mounted J1772 connector holder with a built-in cable hanger that can be printed without supports.
The mounting holes are for (2) #10 pan/button head screws. This can be mounted on a wall but I also spaced the mounting holes so that I can mount it on a storage rack. I designed this to be sturdy while minimizing filament usage.
Works well for me so far so hopefully you'll have the same luck.
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Ultimate
Rafts:
No
Supports:
No
Resolution:
.150
Infill:
30%
Notes:
I used 2mm wall on mine for extra strength.
Category: Automotive