DJI Agras T40 wheel clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this to quickly attach and detach an axle with wheels on it so I could move my T40 by myself.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 1133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You will need a ½" steel pipe, a click pin, a washer, and some push lawnmower wheels with a ½" hub center to complete it.
As of 3/29/23 I have not actually tested this design on my T40. I keep forgetting to bring it with me when I go out to spray. I will say my original design that was permanently attached worked great for moving the drone but the T40 does not like landing on wheels and it gets a little wild.
Use PETG or ABS with 6 vertical layers for this print as it needs to be a little flexible so it can snap over the landing skids. I will make updates as I test it myself and get feedback.