Hakko Loc-Line Y-Splitter Fume Extractor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows a single extraction source to split Loc-Line Hose into 2 collection points.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 766
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We wanted multiple positions for fume extraction at our maker space workbench so I designed a Y-Splitter for (Hakko Loc-Line):
https://hakkousa.com/products/fume-extraction/999-205-01-loc-line-kit-with-round-nozzle.html
I made multiple attachment methods:
- a (through hole) panel mount attachment with a flange and extension for a hose clamp. I haven't printed it but I've printed components with the same dimensions that are functional.
- a (Nederman Arm Fume Extractor) attachment for our electronics bench:
I removed the “capture hood” and used the hole pattern and screws for this connection.
I also used thick foam adhesive backed tape to create a gasket.
Lastly I provided a snap fit test ring to check the tolerance on your equipment before printing the full object. If it doesn't fit perfectly - scale it yourself!
Tolerance for a good snap fit will depend on your printers calibration & print orientation. You can see a little orange tape that was used to tighten the snap fit just a little bit, though this was mostly a plastic saving measure, I adjusted the model afterword.
Please provide feedback from your experience!