1 / 2
MakerGear M3-ID Dual Drive Extruder Upgrade *Remix* — zdjęcie 1
1 / 2

MakerGear M3-ID Dual Drive Extruder Upgrade *Remix*

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I modified the original design for clearance of the BL Touch and shorten screws that don't need to be so long.

Ocena
0 / 5
Polubienia
6
Pobrania
28
Wydruki
0
Wyświetlenia
234
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

In Prusa Slicer, I modified this thingiverse bondtech conversion for the makergear, as the only issue I've had with my machines are the lackluster extruder.   Additional shaving off a few mm of the wire harness plastic so it will clear the bolt to actuate the homing sensor.

Assorted  M3 screws are needed.  I haven't logged everything but if you have a M3 Pack you are probably good.

Supports: Organic from build plate

Needs 1 set per hotend:

2x Medium extruder springs

Bondtech Gears: https://www.partsbuilt.com/bondtech-drivegear-kit-175-8mm/