MakerGear M3-ID Dual Drive Extruder Upgrade *Remix*
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I modified the original design for clearance of the BL Touch and shorten screws that don't need to be so long.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 28
- Makes
- 0
- Views
- 234
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
In Prusa Slicer, I modified this thingiverse bondtech conversion for the makergear, as the only issue I've had with my machines are the lackluster extruder. Additional shaving off a few mm of the wire harness plastic so it will clear the bolt to actuate the homing sensor.
Assorted M3 screws are needed. I haven't logged everything but if you have a M3 Pack you are probably good.
Supports: Organic from build plate
Needs 1 set per hotend:
2x Medium extruder springs
Bondtech Gears: https://www.partsbuilt.com/bondtech-drivegear-kit-175-8mm/