1 / 22
Flashforge Adventurer 3 - Klipper + Revo 6 + ABL + BTT SKR Mini E3 v3 + TFT35-MZ — zdjęcie 1
1 / 22

Flashforge Adventurer 3 - Klipper + Revo 6 + ABL + BTT SKR Mini E3 v3 + TFT35-MZ

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rebuild your Flashforge Adventurer 3 from the ground up with non-proprietary components and get more out of it!

Ocena
4,5 / 5
Polubienia
28
Pobrania
150
Wydruki
3
Wyświetlenia
3373
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

WARNING: This Upgrade requires you to basically gut your printer and rebuild the electronics from scratch. As such, it is recomended for Advanced 3D Printer Users with some electronics skills only. If you would like to keep your OEM mainboard and wiring, please see the Klippventure project by VioSynthax.

There are 2 ABL Sensor Options w/ a Different “Duct - Main” for each: 

  1. IR Z-Height Sensor by David Crocker.
  2. BLTouch v3.1

The Print head is heavily based on these two Models - If you are keeping the OEM mainboard, I recommend these upgrades:

The REQUIRED custom PCB's, required components etc and Klipper Printer Config files are available on my GitHub.

 

CAD Files have been Included for remixing.

Tagi