(right-mounted) Smart Filament Sensor z-cap for RatRig V-minion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Right-mounted RatRig V-minion z-axis cap with a bracket for the BTT filament runout sensor
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 501
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE: On a video from Nero 3D I heard that mounting the spool counter-clockwise would lead to the nozzle being unscrewed. Thus, I made a new variant that mounts it to the left, clockwise. It also adds zip tie holes.
Remixed the stock RatRig V-minion z-axis cap to add a bracket mount for the BTT Smart Filament Sensor.
I'm using it in combination of Michael Whitley's back cover for the sensor.
For space reasons I couldn't use his mount as it sticks to the left, but it's a good design and you should check it out.
You can fix the sensor back cover to the bracket using a long screw.
I'm using M3 heaset inserts and screws.
Cable management using zip ties. I could have added zip tie holes. Maybe one day I update the model.