Kid's Electric Car | Mercedes ML350 | QX-7996 | Gearbox Middle Gearwheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gearbox Middle Gearwheel
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 132
- Wydruki
- 0
- Wyświetlenia
- 1214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
Hi all,
this is my first upload and I hope it helps some of you to save some money or just to make a kid smile again.
The Story behind:
My little one got a Kid's Car that was defective for free from a friend.
The car could not move anymore. You could just hear this annoying crackling noise like a gearwheel slipping trough. So I opened both gearboxes and I saw that both middle gearwheels were broken.
I made this new gearwheel, printed it with PLA+ and replaced the broken ones with it.
It works without problems, cheap fix.
May works with other Kid's Car gearboxes, too.
I used the following parameters:
100% Infill
0.2 Layer Height
Wall Thickness 1.2mm
Top/Bottom Thickness 1.2mm
Recommended Material: At least PLA+, ABS+, PETG