Kid's Electric Car | Mercedes ML350 | QX-7996 | Gearbox Middle Gearwheel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gearbox Middle Gearwheel
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 129
- Makes
- 0
- Views
- 1,203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
Hi all,
this is my first upload and I hope it helps some of you to save some money or just to make a kid smile again.
The Story behind:
My little one got a Kid's Car that was defective for free from a friend.
The car could not move anymore. You could just hear this annoying crackling noise like a gearwheel slipping trough. So I opened both gearboxes and I saw that both middle gearwheels were broken.
I made this new gearwheel, printed it with PLA+ and replaced the broken ones with it.
It works without problems, cheap fix.
May works with other Kid's Car gearboxes, too.
I used the following parameters:
100% Infill
0.2 Layer Height
Wall Thickness 1.2mm
Top/Bottom Thickness 1.2mm
Recommended Material: At least PLA+, ABS+, PETG