Ender 3 S1 Pro NBR Modder Board Front Cover with Connector for 30mm Drag Chain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you have an NBR modder board for the Ender 3 S1 Pro and are looking to add a drag chain this may be the file for you.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 172
- Wydruki
- 3
- Wyświetlenia
- 1653
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a variation of the Nathan Builds Robots Modder Board Front Cover (extra clearance version) that has been modified to work with my 30mm chain links. (See my models for reference).
This cover clears the left stand and aligns the ribbon cable to a vertical position for a smooth operating drag chain. It can also be used stand-alone to align the ribbon vertically without any chain links.
I got my inspiration for this from a similar model: https://www.printables.com/model/376612-nbr-modder-board-front-cover-with-vertical-cable-g
I printed in PETG and would recommend to others, especially if using a resistor on the modder board which will generate extra heat.
Check out my 30mm chain links and Z axis connector to create the full drag chain feature.
https://www.printables.com/model/438759-drag-chain-link-30mm
https://www.printables.com/model/438770-ender3-s1-pro-30mm-drag-chain-connector-mount