Ender3 S1 Pro 30mm Drag Chain Connector Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount and chain link to attach a 30mm drag chain to the Z axis of an Ender3 S1 Pro.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 159
- Wydruki
- 1
- Wyświetlenia
- 1004
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the 30mm drag chain mount for an Ender3 S1 Pro. This mounts to the existing ribbon mounting point on the Z axis pillar. The link has been vertically offset to better align with the sprite.
This model was created from scratch with one of my 30mm links but inspiration was taken from this similar model. https://www.printables.com/model/360429-ender-3-s1-pro-drag-cable-chain-snap-link
I made this model to work with my 30mm links: https://www.printables.com/model/438759-drag-chain-link-30mm
And my NBR modder board sprite mount: https://www.printables.com/model/438740-ender-3-s1-pro-nbr-modder-board-front-cover-with-c
I printed this with supports but if you set your interface properly, the support material popped off quite easily, even with PETG.