Peg board bit holder with removable racks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Can hold up to 40 bits! Has 5 easily removable racks with knurled edges. mounts to American standard 1" peg board.
- Ocena
- 4,8 / 5
- Polubienia
- 110
- Pobrania
- 388
- Wydruki
- 5
- Wyświetlenia
- 1460
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Pretty straight forward print for the most part. I used PETG since my garage can get hot in the summer, but there is no reason this can't be PLA if temperature is not an issue.
Bit Rack - this is the back plate and needs no support
Bit shelf - you will need 5 of these. They need a little bit of support under the finger grips, the auto support worked perfectly. I printed all 5 at once.
Pins - you can print all of them at once (2 curve and 4 straight). the curve pins will need support. but the total print for pins takes 20 minutes.
Assembly - glue in the pins, curved at the top pointing up. place bit shelfs on rack. thats it =)