Peg board bit holder with removable racks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Can hold up to 40 bits! Has 5 easily removable racks with knurled edges. mounts to American standard 1" peg board.
- Rating
- 4.8 / 5
- Likes
- 110
- Downloads
- 388
- Makes
- 5
- Views
- 1,460
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Pretty straight forward print for the most part. I used PETG since my garage can get hot in the summer, but there is no reason this can't be PLA if temperature is not an issue.
Bit Rack - this is the back plate and needs no support
Bit shelf - you will need 5 of these. They need a little bit of support under the finger grips, the auto support worked perfectly. I printed all 5 at once.
Pins - you can print all of them at once (2 curve and 4 straight). the curve pins will need support. but the total print for pins takes 20 minutes.
Assembly - glue in the pins, curved at the top pointing up. place bit shelfs on rack. thats it =)