Gemstock Vertex Bed Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As much as I love the design of the Gemstock printer by Refic, I didn't like to use the original bed mounts because I…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As much as I love the design of the Gemstock printer by Refic, I didn't like to use the original bed mounts because I wanted to use a 220mm heated PCB and a 220mm glass plate together and not a glass plate with a kapton sticker in case the glass would ever break.
The design attaches to the bottom vertex with 2x M4 screw of at least 15mm long for a good grip into the frame.
The bed itself is being clamped in place with the clamp and a M4 screw that ancors itself into the bed holder with a M4 nut.
Print Settings
Printer:
Gemstock - Azurite
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.15mm layer height
Infill:
25%-50%
Notes:
Print with high infill for good strength and use a material that has a high glass transition temperature.
Category: 3D Printer Parts