1 / 4
D&D Dice Sword - Dice Storage for Roleplaying
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You want to lead into battle equipped with your favorite dice? Let fate decide, may the critical hit be with you!
- Ocena
- 0 / 5
- Polubienia
- 81
- Pobrania
- 231
- Wydruki
- 0
- Wyświetlenia
- 2567
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (148)Powiązane
The Idea:
- idea and design by my good friend @just__sophiaa
- fancy sword housing a full set of Roleplay Dice
- self aligning and closing lid using magnets
Design Process:
- after her general design, I added the alignment and magnet features
- pins in the bottom and indent in the top hold the two halves aligned
- the handle houses magnets on each side, in addition to one pair in the tip of the sword
Overall dimensions:
| weight | height | width | depth |
| 145 g | 35 mm | 273 mm | 141 mm |
- fits on an Ender 3 diagonally
Print recommendations:
- PLA
- 0.4 mm Nozzle 0.2 mm Layer height
- 15% grid infill
Additional Parts:
- 6 pieces of 5 mm x 2 mm Magnets (example)
Assembly:
- if you want to add the magnets, you'll have to insert them while printing before the openings get closed
- I had the printer run a bit slower and placed them mid print, you can also add custom gcode to initiate a pause
- remember the magnets polarity, so all are the same and the top and bottom half attract each other after everything is closed up
Bottom Half:
last open Layer: 80
Top Half:
last open Layer: 17
Related Models:
