1 / 4
D&D Dice Sword - Dice Storage for Roleplaying
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You want to lead into battle equipped with your favorite dice? Let fate decide, may the critical hit be with you!
- Rating
- 0 / 5
- Likes
- 81
- Downloads
- 231
- Makes
- 0
- Views
- 2,567
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Idea:
- idea and design by my good friend @just__sophiaa
- fancy sword housing a full set of Roleplay Dice
- self aligning and closing lid using magnets
Design Process:
- after her general design, I added the alignment and magnet features
- pins in the bottom and indent in the top hold the two halves aligned
- the handle houses magnets on each side, in addition to one pair in the tip of the sword
Overall dimensions:
| weight | height | width | depth |
| 145 g | 35 mm | 273 mm | 141 mm |
- fits on an Ender 3 diagonally
Print recommendations:
- PLA
- 0.4 mm Nozzle 0.2 mm Layer height
- 15% grid infill
Additional Parts:
- 6 pieces of 5 mm x 2 mm Magnets (example)
Assembly:
- if you want to add the magnets, you'll have to insert them while printing before the openings get closed
- I had the printer run a bit slower and placed them mid print, you can also add custom gcode to initiate a pause
- remember the magnets polarity, so all are the same and the top and bottom half attract each other after everything is closed up
Bottom Half:
last open Layer: 80
Top Half:
last open Layer: 17
Related Models:
