Bullitt Bike Kickstand feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The kick stand caps that came with the bike wore through. So designed ones to replace.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 529
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
The kick stand caps that came with the bike wore through. The local bike shop was not able to get replacements. So... 3D print some. I tried to add a bevel to make it an easier rock up onto the kick stand.
The hole is a little large for the leg, since I used the kickstand as metal on ground for a bit, meaning I need a bit of extra room to get them on. A dab of hot glue, or a strip of masking tape on the let works wonders.
Mirror for left/right combo.
I would recommend printing on its side so you have less chance of shearing off the bottom layers (happened in an earlier version for me). I printed this one at an angle, but needed supports.
Have been using for a bit and working well.
Hope this helps!
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
50
Filament: MatterHacker PLA Green
Notes:
Use a strong infill pattern for best results.
Category: Sport & Outdoors