Bullitt Bike Kickstand feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The kick stand caps that came with the bike wore through. So designed ones to replace.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 45
- Makes
- 0
- Views
- 531
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
The kick stand caps that came with the bike wore through. The local bike shop was not able to get replacements. So... 3D print some. I tried to add a bevel to make it an easier rock up onto the kick stand.
The hole is a little large for the leg, since I used the kickstand as metal on ground for a bit, meaning I need a bit of extra room to get them on. A dab of hot glue, or a strip of masking tape on the let works wonders.
Mirror for left/right combo.
I would recommend printing on its side so you have less chance of shearing off the bottom layers (happened in an earlier version for me). I printed this one at an angle, but needed supports.
Have been using for a bit and working well.
Hope this helps!
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
50
Filament: MatterHacker PLA Green
Notes:
Use a strong infill pattern for best results.
Category: Sport & Outdoors