AnyCubic Kossel Linear Plus V-Rail mod plus corner cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This AnyCubic Linear Plus mod is in response to the very poor operational properties of the supplied linear glide…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 385
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This AnyCubic Linear Plus mod is in response to the very poor operational properties of the supplied linear glide rails that they provide. I have replaced the vertical member with true V-Rail from Openbuilds.com, and used the wheels and eccentrics from the same source. The carriage (shown in white) is a custom design, and is dimensionally equivalent to the linear glide in all ways that matter. The performance has been stellar.
Also included is a remix of a corner cover that keeps glue, plastic and any other trash off the motors and the internals of the printer.
Solidworks models are available for both custom parts.
Use 80% fill for the carriage, anything you like for the cover plates.
I posted a youtube video of this in action: https://youtu.be/0sDQ4nSkMV8
Print Settings
Printer Brand:
Deltaprintr
Printer:
Rafts:
No
Supports:
No
Resolution:
.2mm layer
Infill:
see description
Notes:
These are NOT hard to make. You'll need custom length screws to mount the black Anycubic molded part to this. Holes are provided for embedded nuts.
Category: 3D Printer Parts