AnyCubic Kossel Linear Plus V-Rail mod plus corner cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This AnyCubic Linear Plus mod is in response to the very poor operational properties of the supplied linear glide…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 385
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution
This AnyCubic Linear Plus mod is in response to the very poor operational properties of the supplied linear glide rails that they provide. I have replaced the vertical member with true V-Rail from Openbuilds.com, and used the wheels and eccentrics from the same source. The carriage (shown in white) is a custom design, and is dimensionally equivalent to the linear glide in all ways that matter. The performance has been stellar.
Also included is a remix of a corner cover that keeps glue, plastic and any other trash off the motors and the internals of the printer.
Solidworks models are available for both custom parts.
Use 80% fill for the carriage, anything you like for the cover plates.
I posted a youtube video of this in action: https://youtu.be/0sDQ4nSkMV8
Print Settings
Printer Brand:
Deltaprintr
Printer:
Rafts:
No
Supports:
No
Resolution:
.2mm layer
Infill:
see description
Notes:
These are NOT hard to make. You'll need custom length screws to mount the black Anycubic molded part to this. Holes are provided for embedded nuts.
Category: 3D Printer Parts