MINI 13: The Vulture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You're messing with things that you don't understand!
- Ocena
- 0 / 5
- Polubienia
- 168
- Pobrania
- 493
- Wydruki
- 2
- Wyświetlenia
- 2333
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The second villain from the Sinister Six, The Vulture. I had made a quick set of wings but wasn't happy with them so I started to scale down the Lucky 13 Vulture wings I had made previously when I saw the fantastic Mini 13: Wings that Bruno Vinícius had made.
This design is meant to replace most of the Mini 13 armor. On top of downloading my files, you will still need to download the Mini 13 frame, mini13-armor-foot-2x.stl as well as Bruno's Mini 13: Wings
I print everything with a layer height of 0.12 mm and a speed no faster than 50 mm/s. In my experience, printing any faster than that can cause the fit between parts to be too tight, sometimes to the point where they won't fit.