MultiClip Object Mount Templates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are the clip mount templates for the MultiClip System.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 576
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
These are the clip mount templates for the MultiClip System. These are merely demo objects, meant not for direct print but to be incorporated into your own design.
I am publishing these objects separately on a relaxed license so you can use them even if you intend to use your objects commercially.
For more detail and background, please visit the MultiClip Main Page
You can also find these and some more MultiClip Mount Templates on TinkerCad for easy incorporation into your own designs.
Print instructions
Supports: No
Resolution: 1.5
Notes:
I recommend not to use resolutions below 0.15mm for printing, otherwise you might experience negative impacts on the fitting of the clip.
If you print this object in upright position with an FDM printer, it might be advisable - depending on your printer and filament - to increase the width of the clip hole by 0.1 to 0.2mm (or just resize to 101%) to compensate for layer-shift and extrusion inaccurancies.