Camera mount for Elegoo Neptune 3 and Neptune 4 Pro Plus Max (Display Replacement - Klipper Webcam)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When you are using Klipper and don't need the original display then you can use the screw holes to mount your camera.
- Ocena
- 5 / 5
- Polubienia
- 217
- Pobrania
- 1644
- Wydruki
- 8
- Wyświetlenia
- 11 427
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE
The camera mount was working but when there were fast short movements with many direction changes it started to wobble. I added a V2, it doesnt look as nice but it is more stable. If you are into timelapse videos then you definitely should go with V2.
I am using the Sonic Pad with my Elegoo Neptune 3 Plus. I removed the now useless original display and created a camera mount which uses the screw holes of the display mount.
I used the Knurled 1/4-20 Camera Mount Screw by jazzychad to connect my Logitech C920 to the camera mount. You can use all webcams with a ¼ mount screw hole.
The video I added is using a quick and dirty print of the camera mount with only 5% infill. It wasn't sturdy enough for my wobbling table. ;)
Print
Material: PETG
Infill: 25%
Layer Height: 0.2mm
Supports: none / support enforcers only (not sure if needed! Also new to FDM printing)
You can print it flat and the build plate to avoid using supports.