1 / 6
The Masters - A Fridge Magnet Unlike Any Other
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a magnet for your fridge, or other magnetic surfaces
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 72
- Wydruki
- 1
- Wyświetlenia
- 522
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 4)Remiksy (1)Kolekcje (16)Powiązane
For printing, I recommend using the 3mf file or the step file. This will bring the part in with 4 components, one for each color.
Each piece takes four 10x2mm magnets. Hold in place with a small drop of medium or thick cyanoacrylate superglue.
My examples are made with Inland PETG, but PLA should work nice as well.