Mini vise-clamp thing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a mini-clamp to hold down my spool holder to my desk and mistertech's design was just about what I had in…
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 342
- Wydruki
- 4
- Wyświetlenia
- 1629
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I needed a mini-clamp to hold down my spool holder to my desk and mistertech's design was just about what I had in mind, minus the headphone part. I also shortened the clamp down to 20mm because my desk is very thin. I also wanted the screw to withstand more tension, so I decided to split the original model and print both halves horizontally and acetone weld them after.
If you want the whole bolt or a larger version, check out the original design.
Print instructions
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 30%
Post-Printing
Acetone weld
With a small paintbrush, cover the flat surface of each screw half with acetone. Quickly, before the acetone evaporates, align the halves and hold together firmly for a few seconds.