Mini vise-clamp thing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a mini-clamp to hold down my spool holder to my desk and mistertech's design was just about what I had in…
- Rating
- 5 / 5
- Likes
- 55
- Downloads
- 342
- Makes
- 4
- Views
- 1,629
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I needed a mini-clamp to hold down my spool holder to my desk and mistertech's design was just about what I had in mind, minus the headphone part. I also shortened the clamp down to 20mm because my desk is very thin. I also wanted the screw to withstand more tension, so I decided to split the original model and print both halves horizontally and acetone weld them after.
If you want the whole bolt or a larger version, check out the original design.
Print instructions
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 30%
Post-Printing
Acetone weld
With a small paintbrush, cover the flat surface of each screw half with acetone. Quickly, before the acetone evaporates, align the halves and hold together firmly for a few seconds.