Enclosure for Train Departure Board Sign
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for a Raspberry Pi powered live train departure board.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 427
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Link to my blog for other projects
My only contribution to this project is a 3D printed enclosure, which makes it easier to integrate a full-sized Raspberry Pi, rather than the Pi Zero, which is notoriously difficult to get hold of right now. For everything else just follow this guide on the Balena Blog. No soldering skills or Raspberry Pi knowledge are necessary.
If you already have a Raspberry Pi, access to a 3D printer, a USB cable, and an SD card, then all you need to buy is the approximately £30 OLED screen off eBay. That's much more affordable if you don't want to buy a commercially available version for £150.
Tweak the CAD files as you need. I used a right-angle micro USB adapter, but it's not necessary if the cable you're using has a short connector. Feed the cable out of either side depending on where you're mounting the sign. I was being somewhat lazy by not trying to make the enclosure as small as possible, but it still works well.