Webcam cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple webcam cover.
- Ocena
- 4,632 / 5
- Polubienia
- 136
- Pobrania
- 1136
- Wydruki
- 20
- Wyświetlenia
- 4181
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a simple webcam cover. There are a lot of models on Thingiverse, but i just couldn't find one that printed well and that was usable, so I designed this one.
It's easy to print at 0.2mm, works well, has enough surface to fix to the screen and as a plus there's a version with a hole for thecamera on* LED (placement based on a macbook; please leave a comment if it works for your setup too).
No supports or rafts. 100% infill and as positioned in the stl file.
The box can easily be fixed to your screen or bezel with stick glue. Play with the placement until you commit to permanent fixation with a drop of superglue if you want.
- Just make sure your first layer is 0.2 as well.
Print instructions
Rafts: No
Supports: No
Resolution: 0.2
Infill: 100%